Complementary Products

UniCal - Multimeter & Handheld Configurator

Bookmark PageEmail PagePrint PageLike UsFollow UsConnect With Us
A-Z Product Index

ioSelect Home > Products > Accessories > UniCal

DC Calibrator, Multimeter, and UP488/Z109REG2 Configurator

ioSelect's UniCal is a signal generator, signal measurement, process calibrator, and configurator all in one. The ability to test electrical components, detect faults, and simulate analog signals all at your finger tips. This compact unit is suitable in industrial environments and is enclosed by a protective rubber boot. The Unical's features don't stop there by providing calibration, libearization, and start up of field instruments and sensors.

Features:

• Multimeter
• DC Signal Generator
• Process Calibrator
• Handheld Configurator for UP488/Z109REG2
• OLED Display
• 0.1% Precision
• NiMh Battery & Charger
• Protective Case
• Programming Cable

Click Here for Data Sheet

Click Here for Quote

UniCal

(Click to Enlarge)


General Specifications

Controls and Interfaces

Power Supply:

2 NiMh batteries AA type, 2.65 mAh

Button:

ON/OFF and Back - General Navigation

Lifetime:

8 hr min with max load, 20 hr type. 120 Vac with battery charger

Knob/Button:

Scroll (rotation)
OK/Select/Enter/Move (push)

Consumption:

50 mA min, 300 mA max
6 V, 300 mA stabilized

Language:

English, French, German, Italian, and Spanish

Operating Temp:

0 to 50 °C (32 to 122 °F)

Contrast:

15 Levels

Humidity:

30 to 90% non condensing

Screensaver:

Display will scroll vertically after 7 minutes of inactivity

Frequency:

10 Hz

Functions:

General setup
Current/Voltage Signal Generator
Current/Voltage Measurement
UP488 Programming

I/O:

Voltage: 0-11 V, Min load = 1 kΩ
Current: 0-21 mA, Max load = 500 Ω

Errors:

Over/Under Voltage/Current
Blinking value = signal fault

Protection:

±30 V

Dimensions:

140 x 75 x 33 mm (H x W x D)
(5.51 x 2.95 x 1.3 in.)

Precision:

0.1%

Weight:

50 g (1.8 oz.)

Resolution:

0.002 mA
0.001 V